Project Information
HEAT RECUPERATOR OF EXHAUST GASES FROM HEATING BOILERS
Description of the project and products or services provided
The idea of the proposed project is to utilize the heat of flue gases with condensation of water vapor in them, while converting part of the resulting thermal energy into mechanical work of transporting the coolant. The proposed heat exchanger will significantly increase the efficiency of the boiler unit (up to 17%), as well as reduce the cost of transporting the coolant, while this device will significantly expand the capabilities of non-volatile systems, due to the fact that electric energy sources will not be required for the circulation of the coolant, that is, the heat supply system equipped with the proposed heat exchanger will retain energy independence. The transformation is proposed to be carried out by working on a closed thermodynamic cycle.
The main competitive products of this technology are heat recovery heat exchangers from various manufacturers of large boilers and furnaces, but they are designed to reduce the temperature to 120-130 degrees Celsius, the proposed technology provides a decrease in temperature to 60-70 degrees Celsius, and, accordingly, a higher efficiency of thermal energy generation. Also, condensation boilers can be counted as competitors, which provide the same parameters, but they are significantly more expensive by 5-6 times.
These indicators are achieved through the use of a unique thermodynamic cycle of the heat exchanger.
The main competitive products of this technology are heat recovery heat exchangers from various manufacturers of large boilers and furnaces, but they are designed to reduce the temperature to 120-130 degrees Celsius, the proposed technology provides a decrease in temperature to 60-70 degrees Celsius, and, accordingly, a higher efficiency of thermal energy generation. Also, condensation boilers can be counted as competitors, which provide the same parameters, but they are significantly more expensive by 5-6 times.
These indicators are achieved through the use of a unique thermodynamic cycle of the heat exchanger.
Location of the project localization
Saransk (development), the village of Atyashevo (production)
Implementation stage
TRL 5. An experimental sample was made on a real scale using semi-industrial technology and tested, emulation of the main external conditions was carried out.
Project participants
“NPO Energosystems” LLC, Ogarev Mordovia State University
Planned production volumes
In 2024 - 1 800 thousand rubles
187 741
thousand rubles in 2025
Number of jobs created
In 2024 - 6
50
in 2025
Estimated investment volume
18 010,24
thousand rubles
Required amount of co-financing
12 010,24
thousand rubles
Contacts
Lysiakov Anatoly Ivanovich
Email
lysyakov_lai@mail.ru
phone number
+7 (987) 692-49-78